<VV> '69 Ignition switch

Joel McGregor joel at joelsplace.com
Tue Jul 31 01:37:36 EDT 2018


Frank is the man.  I didn't see his reply.



Joel McGregor


-------- Original message --------
From: FrankDuVal via VirtualVairs <virtualvairs at corvair.org>
Date: 7/30/18 10:28 PM (GMT-06:00)
To: virtualvairs at corvair.org
Subject: Re: <VV> '69 Ignition switch

If you want keys made, just email me only, not to everyone on the VV list.

Did you loose the trunk/glove box key also? I can make a key from the
glove box lock. Usually I need to take the glove box lock cylinder
apart, as the code is stamped on the internal cylinder, not the outer
housing. Of course, most locksmiths can also do this for you, just let
them know that the pretty bezel DOES NOT NEED to be removed to perform
this operation. I have seen people damage the pretty bezel of glove box
locks to get them open. NOT THE WAY!!!!!!

You can also take a headlamp assembly out to reach in and remove the
striker to get the trunk open, but just taking the glove box lock out is
easier if you have time to send me the lock and return it.

Frank DuVal


On 7/30/2018 11:18 PM, FrankDuVal via VirtualVairs wrote:
> Lock cylinder is separate from ignition switch itself.
>
> 69 originally has E & H blanks, the E being the ignition switch
> rectangular head key. E was also used on several more years of GM
> cars, into the 90s. A locksmith should be able to unlock the cylinder,
> remove it and make keys that fit the existing lock cylinder.
>
> Also, if you remove the door lock, (which uses the same key unless
> changed in the last 50 years...) you can get the code stamped on this
> and get keys made. I can code cut keys fr you from this code and mail
> them to you  for only $7 a pair! Way cheaper and faster than buying
> locks, etc.......
>
> Frank DuVal
>
>
> On 7/30/2018 2:13 PM, Ken Clark via VirtualVairs wrote:
>> Need complete Ignition switch for 69. Lost keys and need to replace.
>> Door locks also.
>> Ken Clark
>
> _______________________________________________

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
Archives: http://www.vv.corvair.org/archive.htm
 _______________________________________________


More information about the VirtualVairs mailing list