<VV> 64 Spyder spark problem
Harry Yarnell (Verizon)
harryyarnell at verizon.net
Sun Jun 9 13:26:01 EDT 2019
Does the rotor turn?
Do you have voltage at the + side of the coil?
From: VirtualVairs [mailto:virtualvairs-bounces at corvair.org] On Behalf Of
SGLowell via VirtualVairs
Sent: Sunday, June 09, 2019 12:56 PM
To: virtualvairs at corvair.org
Cc: Scott Lowell
Subject: <VV> 64 Spyder spark problem
Starter and lights work but I continue to get no spark (Pulled coil wire out
enough to see a spark arc.) on my son's 64 Spyder.
So far we've:
- Replaced the Pertronix Igniter unit with old fashion points &
condenser. No Spark.
- Replaced the coil with a spare. No Spark
- Checked wire continuity of wire from Positive Coil Terminal to
2-shared connector at firewall. OK
- Checked continuity of resistor wire from 2-shared connector
(Shared with Positive Coil Terminal) from firewall to 10-terminal connector
at Firewall. OK
Our next check is the wires from the 2-shared connector to the starter. We
didn't disturb these wires so I have my doubts.
Any suggestion on what we might do/check next would be greatly appreciated.
After the next check outlined above, I'm out of things I can think of to
check or try.
This message was sent by the VirtualVairs mailing list, all copyrights are
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
More information about the VirtualVairs