<VV> Electric Fuel Pump

James Davis hurricanehazel16 at gmail.com
Wed Aug 19 14:02:27 EDT 2026


Those who are careful and don't like fires will use short sections of Gates
Barricade fuel hose with "green shield technology" for carbureted engines.
NAPA carries it  at about $6.00 a foot.  An FC  needs about 3 feet and you
have to pull the tank to install it. (but only once in a lifetime)..
Jim Davis

On Wed, Aug 19, 2026 at 7:56 AM Bryan Blackwell via VirtualVairs <
virtualvairs at corvair.org> wrote:

> Hi Steven,
>
> I'll make one comment regarding electric fuel pump installs.  When Chevy
> designed the fuel system, they used a minimum amount of rubber hose - just
> two short lengths to connect the body hard line to the tank and engine.
> They are essentially couplers.  I suggest that however you install your
> pump that you do the same, I've seen a number of installations with what I
> consider far too much rubber hose.  If you're over say six inches of line,
> consider making a hard line or routing the line differently, it's not that
> difficult and you only need to do it once.
>
> --Bryan
>
> > On Aug 18, 2026, at 1:54 PM, Steven J. Serenska via VirtualVairs <
> virtualvairs at corvair.org> wrote:
> >
> > Hello Everyone:
> >
> > I am hoping this list still works....
> >
> > I have had it with factory fuel pumps.  My car has been off the road for
> much of the convertible season.
> >
> > Can anyone let me know how difficult it is to install the Clark's kit
> (C10295    ULTIMATE ELECTRIC FUEL PUMP KIT)?  I know nothing about it,
> e.g., whether it is inline, submersible, etc. and how it works with respect
> to attaching it to the stock steel fuel lines.
> >
> > Any comments, thoughts, etc. that people might have would be most
> appreciated.  Any suggestions for alternatives to the Clark's kit are also
> welcome.
> >
> > Thanks.
> >
> > Steven J. Serenska
> > 401-935-5454
>
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
> the property
> of the writer, please attribute properly. For help, mailto:
> vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
> http://www.vv.corvair.org/mailman/options/virtualvairs
> Archives: http://www.vv.corvair.org/archive.htm
>  _______________________________________________
>


More information about the VirtualVairs mailing list